Create an Account - Increase your productivity, customize your experience, and engage in information you care about.
Show All Answers
A properly installed and maintained smoke alarm is the only thing in your home that can alert you and your family to a fire 24 hours a day, seven days a week. Whether you’re awake or asleep, a working smoke alarm is constantly on alert, scanning the air for fire and smoke.
According to the National Fire Protection Association, almost two-thirds of home fire deaths resulted from fires in properties without working smoke alarms. A working smoke alarm significantly increases your chances of surviving a deadly home fire.
Smoke alarms are powered by battery or they are hardwired into the home’s electrical system. If the smoke alarm is powered by battery, it runs on either a disposable 9-volt battery or a non-replaceable 10-year lithium (“long-life”) battery. A backup battery is usually present on hardwired alarms and may need to be replaced.
These batteries must be tested on a regular basis and, in most cases, should be replaced at least once each year (except for lithium batteries).
There are many different brands of smoke alarms available on the market, but they fall under two basic types: ionization and photoelectric.
It cannot be stated definitively that one is better than the other in every fire situation that could arise in a residence. Because both ionization and photoelectric smoke alarms are better at detecting distinctly different, yet potentially fatal fires, and because no one can predict what type of fire might start in a home, the USFA recommends that every residence and place where people sleep be equipped with both ionization and photoelectric smoke alarms, or dual sensor smoke alarms, which contain both ionization and photoelectric smoke sensors
In addition to the basic types of alarms, there are alarms made to meet the needs of people with hearing disabilities. These alarms may use strobe lights that flash and/or vibrate to assist in alerting those who are unable to hear standard smoke alarms when they sound.
Install smoke alarms in key areas of your home, on every level, including the basement. Many fatal fires begin late at night or early in the morning, so the U.S. Fire Administration recommends installing smoke alarms both inside and outside of sleeping areas.
Since smoke and many deadly gases rise, installing your smoke alarms at the proper level will provide you with the earliest warning possible. Always follow the manufacturer’s installation instructions.
Smoke alarms are not expensive and are worth the lives they can help save.
Ionization and photoelectric smoke alarms cost between $6 and $20. Dual sensor smoke alarms cost between $24 and $40.
If you cannot afford a smoke alarm for your home contact the Kilgore Fire Department at 903-988-4112 and one will be provided to you.
Yes, if you are unable to install a smoke alarm, contact the Kilgore Fire Department and we will assist you in the installation process.
Smoke alarms must be maintained! A smoke alarm with a dead or missing battery is the same as having no smoke alarm at all. A smoke alarm only works when it is properly installed and maintained. Depending on how your smoke alarm is powered (9-volt, 10-year lithium, or hardwired), you’ll have to maintain it according to manufacturer’s instructions.
A smoke alarm is just doing its job when it sounds while you’re cooking or taking a shower with lots of steam. If a smoke alarm sounds while you’re cooking or taking a shower with lots of steam, do not remove the battery. Instead, you should:
Never disable a smoke alarm. Disabling a smoke alarm or removing the battery can be a deadly mistake.